When the HomeWizard Energy P1 Meter, HomeWizard kWh Meter or HomeWizard 3-phase kWh meter. (Hereafter referred to as HomeWizard Meter) has been properly installed on the HomeWizard Energy app. This HomeWizard Meter is automatically provided with the recent firmware. The process can take up to a day before installing the recent firmware. This process is completely automatic and usually you do not notice it. There is no process to do this firmware manually. The advice is therefore to have patience until the firmware is installed on the relevant HomeWizard Energy meter.

Do not disconnect the HomeWizard Energy meter from its linked network. This will only slow down the process.

Firmware version

In the HomeWizard Energy app you can check which firmware version is installed on the relevant HomeWizard Energy meter. You can check this with the following steps:

  1. Open the HomeWizard Energy App'HomeWizard Energy' -app
  2. Navigate to 'Settings' by tapping the gear icon at the top right.
  3. At the top of the menu tap 'Meters'
  4. Click on the 'My energy devices'.
  5. From this you can see which version the meter is equipped with.